GameHomeHub/Controller Tester — Sticks, Drift, Deadzone & Buttons
Gamepad tester · controller tester
Controller Tester — Sticks, Drift, Deadzone & Buttons
Check every button, both sticks and both triggers live in the browser — and find out whether your controller has stick drift, how wide its deadzone needs to be, and whether rumble actually works. No driver, no install, nothing uploaded.
Live controller readout
Runs in this tab · nothing uploadedThis browser does not expose the Gamepad API. Chrome, Edge or Firefox on a desktop will.
rest minimum 0.00 · centred
rest minimum 0.00 · centred
A stick resting inside this radius is treated as centred. If the rest minimum is larger, the game will see movement you did not make.
Everything runs locally through the browser's Gamepad API — no driver, no install, nothing uploaded. Poll rate and input age come from the pad's own timestamps, so treat them as indicators rather than lab numbers. Motion sensors are only shown when the browser exposes them; most controllers do not.
How to use it
- Connect the controller and press any button on it. Browsers deliberately hide gamepads until they send input, so nothing appears before that first press.
- Work round the pad: hold each button and watch the grid light up, roll both sticks to their edges, squeeze both triggers and check the bars reach 100%.
- Let go of everything and wait two seconds. The rest minimum under each stick is the drift reading — if it stays above 0.06 without being touched, the stick is not returning to centre.
- Drag the deadzone slider and watch the inside/outside label: find the smallest radius that covers the rest error, and use that in your game settings.
What each reading means
Sticks report raw values from −1 to 1 on each axis. The dot is the reported position; the dashed ring is your deadzone. A dot that never sits in the middle is the classic drift failure.
Triggers are analogue on modern pads: the bar shows how far the trigger is pulled, not just whether it is pressed. A trigger reading above zero at rest is usually dirt or a worn spring.
Poll rate counts how many times the pad reported new data in the last second; input age is the time since its last change. Both come from the pad's own timestamps — useful for comparing a wired and a wireless connection, not a replacement for a proper latency test.
Sensors: motion data is only available if the browser exposes gamepad.pose, which most controllers do not, so the panel reports "not exposed" rather than inventing readings.
Common problems
- Drift that only shows up in one game. A game can use its own deadzone; if the tester shows a clean centre but the game drifts, the game's deadzone or a controller profile is the cause, not the stick.
- Triggers that never reach 100%. Some pads report triggers on axes 4 and 5 instead of buttons 6 and 7; the tester reads the standard mapping, and the diagnostics flag a non-standard mapping when the browser reports one.
- Rumble button does nothing. Vibration is opt-in per browser and per controller. Chrome and Edge on Windows are the most reliable; Firefox and Safari often expose nothing, and the panel says so.
- Wireless feels worse than wired. Compare the poll rate and input age both ways — a drop in rate or a jump in age on Bluetooth is the connection, not the pad.
Frequently asked
Why does my controller not show up?
Browsers only expose a gamepad after it sends input. Plug it in (or pair it over Bluetooth) and press any button — the tester then detects it. Some controllers also need to be in the right mode: a Switch Pro Controller on PC may present as a different device until switched.
What is stick drift and how does the tester find it?
Drift is a worn stick reporting movement while nothing is touched. The tester watches each stick's magnitude over a rolling window and reports the smallest value seen — the rest minimum. If that minimum stays above about 0.06, the stick is not returning to centre and games will drift.
What does deadzone mean here?
The deadzone is the central radius a game ignores, so small rest errors are treated as centre. The slider shows whether your stick's rest minimum falls inside or outside a given radius — raise it when the stick rests off-centre, lower it when fine aim feels sluggish.
Does the rumble test work with my controller?
Rumble needs a browser and controller that both support the vibration actuator; Chrome and Edge on Windows are the most reliable today, and only some pads expose it. The panel says so when it is unavailable instead of pretending.